28-Jun-2024
0200710102
I have read and understood the disclaimer below
and wish to download the designated software
It is one of the "Add-On Applications System" that extend the camera function.
This paid application automatically controls the camera's repetitive motion (loop motion) for efficient shooting.
■Description:
The Auto Loop Application enables the camera to automatically repeat movement and zooming between multiple pre-registered positions.
• Repeated movement and zooming between up to four positions (Up to five motion patterns can be memorized)
• Adjustable stopping time between positions, moving speed between angles, and acceleration/deceleration (fade mode) at start and stop of movement.
Version 1.2.0 incorporates the following fixes and enhancements:
1. Extends stop time settings.
2. Enables the ability to reset to default settings.
3. Fixes minor issues.
< Application File >
Auto_Loop_RA-AL001-v010200.bin
<Applicable Models:>
CR-N700 / CR-N500 / CR-X300
The application contains software modules developed by third parties. The details are available in the download: Readme-E.txt. The Third-party Software License (ThirdPartySoftware-E.txt) and the license conditions are available in the ThirdParty Folder which is inside the LICENSE folder.
■ Version 1.1.0
1. Adds support for the Auto Loop Application to the CR-N500 / CR-X300.
2. Adds support for use of the License Activation Tool.
The application runs in the camera. For supported cameras, refer to "Applicable Models".
To install and activate the application, use a PC with the following OS: macOS14/13
Be sure to read the Readme and User's Guide of the software before using it. Notes and restrictions on use are included. Third party licenses may be required.
1. Download the file to any folder.
2. Open dmg file.
3. For the rest of the instructions, check the Readme.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Thailand) Co., Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.