01-Jul-2024
0400974102
I have read and understood the disclaimer below
and wish to download the designated software
Firmware Version 1.5.0 incorporates the following fixes and enhancements:
1. Adds Lite version of the automatic tracking application. Lite version application has basic features of the automatic tracking application.
2. Enables the ability to adjust Custom Picture [Black: Master Pedestal], [Black: Master Black Red], and [Black: Master Black Blue] more widely.
3. Revises the display of Clear Scan Settings.
4. Adds function for setting a limit on the range of operation of the pan/ tilt.
5. Enables the ability to set zoom and focus speeds in more detail.
6. Enables the ability to make [Speed Level] of Preset Setting a finer adjustment at lower speeds.
7. Adds function for color bar output.
8. Adds function for selecting SDI output timecode superposition on or off.
9. Displays the Camera Name set by the user at the top of the settings Page.
10. Increases target bit rate limit when using encryption with SRT protocol.
11. Fixes minor issues.
Update the firmware from the camera's Settings Page.
For details, refer to the camera's Settings Guide.
<Firmware file>
- crn500-v150.bin
The firmware contains software modules developed by third parties. For details, see "ReadMe-E.txt" in the downloaded file and "ThirdPartySoftware-E.pdf" (third-party software) in the lower part of each folder in the "LICENSE" folder. The license terms for each module are contained in the same folder.
Ver. 1.4.0
1. Adds support for registering the still thumbnail when a preset memory is registered.
2. Adds support for registering the still thumbnail of the trace start position.
3. Adds function for freeze image during preset moving.
4. Adds Adaptive Bitrate (ABR) function for video delivery over SRT protocol.
5. Adds support for setting up to four output destinations for the free-d protocol.
6. Adds the option "other than network settings and management information" as restore items for the backup/ restore function.
7. Adds Backup/ Restore function for Add-On Applications System settings.
8. Fixes an issue that caused audio noise during RTMP distribution to the video streaming service.
9. Fixes minor issues.
Ver. 1.3.0
1. Adds support [Add-On Applications System] that extends camera functions by installing paid applications.
*When the application is ready for release, we will inform you on our website.
2. Adds support for NDI 5.
*NDI: An open standard for connecting video equipment over a network.
3. Adds record button for camera settings
4. Adds the ability to allow passwordless login for the image quality page.
5. Adds speed setting when registering presets.
6. Adds support for simplified Chinese UI.
7. Improves PTZ usability in settings pages. (Adds drag to move feature)
8. Video output from SDI/ HDMI is possible by default when no LAN cable is inserted.
9. Adds angle for shutter mode (adjusting with open angle).
10. Adds function for fine-tuning the WB color correction value (CC).
11. Adds support for licenses activation tool.
*When the application is ready for release, we will inform you on our website.
Ver. 1.2.0
1. Adds support for SRT protocol.*
*SRT Protocol: A widely used video transmission protocol for video streaming and live broadcast, developed and open sourced by Haivision and supported by the SRT Alliance.
2. Adds support for free-d protocol.*
*free-d protocol: A widely used protocol for camera tracking communication, mainly in virtual studio systems.
3. Fixed a bug that sometimes caused the pan/ tilt/ zoom to not move to the correct position during prolonged continuous power supply. (Same as correspondence of Ver. 1.1.4)
4. Fxied a bug in 'Genlock function'.
However, when using the Genlock function, select Level A as the mapping method for the output signal of the 3G-SDI connector.
If you select Level B, the V phase may shift. (Same as correspondence of Ver. 1.1.4)
Ver. 1.1.4 (Ver. 1.1.4 is not available on the Web. The amendments to Ver. 1.1.4 will be included in Ver. 1.2.0.)
1. Fixed a bug that sometimes caused the pan/ tilt/ zoom to not move to the correct position during prolonged continuous power supply.
2. Fixed a bug in 'Genlock function'.
However, when using the Genlock function, select LevelA as the mapping method for the output signal of the 3G-SDI connector.
If you select LevelB, the V phase may shift.
Ver. 1.1.3
1. Fixed bugs in 'Preset Settings' and 'Trace function'.
2. Improved AF accuracy during zoom operation (near infinity).
3. Improved synchronization of video and audio during long time playback.
4. Fixed a bug that caused the camera to stop when using some controllers.
5. Minor bug fixes.
Ver. 1.1.1
1. Fixed a bug that made blue lines appear on the left and upper edges of the screen, depending on the combination of specific conditions.
Ver. 1.1.0
1. Able to now specify desired [Time] or [Speed Level] for Pan/ Tilt/ Zoom operations when calling presets.
By this, when calling a preset, the Pan/ Tilt/ Zoom operations start at the same time and finish at the same time.
2. Able to now stop a preset operation by the [Stop] button.
3. Minor bug fixes.
Windows 10 64bit, Windows 11
macOS 14, macOS 13
Do not turn off the power to the camera while performing the firmware update.
Turning off the camera at this stage may result in disabling its ability to boot correctly.
1. Download the file to any folder.
2. Extract files from a compressed file (ZIP file).
3. For further instructions, refer to Readme in the decompressed folder.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Thailand) Co., Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.