18-Nov-2024
0401013301
I have read and understood the disclaimer below
and wish to download the designated software
This program is to upgrade your printer firmware.
Ver.14.00
- Added [Percent [%]] as a cut length correction unit. Added the ability to toggle the cut length correction unit between [Percent [%]] and [millimeter [mm]]. Refer to the latest User's Guide for details.
- Added "inches" as a unit for media size.
- Increased the digits displayed for the number of cutter operations from 6 to 8.
- Improved the print media setting sequence. Now text data does not have to be entered before pressing the [Print] key to proceed to the setting screen.
- Changed the minimum cut length for labels from 4mm to 2mm.
Ver.13.00
- The version number has been changed for an administrative reason in the printer production. All features remain unchanged.
Ver.11.00
- Changed the instructions displayed when a "Feed error" occurs. Refer to the latest User's Guide for details.
Ver.10.02
- A menu has been added to improve the accuracy of cut length of the last piece of printed media:
[Settings] key > Others > Precise End Length: Off (default)/On
- Minimum cut length for Plate has been changed from 4 mm to 2 mm.
Current version of the printer driver and MK Desktop Utility do not support this specification change yet, the change becomes effective only at a standalone printing (without PC).
- Frequency of rare white line in the half cut printing has been reduced.
- Wrap Around Tape has been added to the product lineup of print media.
- Name of the setting menu "Print priority" to "Media Save Mode."
- Rewind amount of media has been optimized when using Label Tape or Wrap Around Tape and "Rewind movement" is set to "ON".
- A change has been made indicating a precautionary notification on the display when using 150m Ribbon Cassette (Black) or 85m Ribbon Cassette (White) for the Plate media as they may cause image failures on Plate.
- A change has been made indicating a dialog "Eject Canceled print media? Yes/No" when aborting print operation by opening the cover.
- A change has been made indicating a message "Close cover and press any key" when attempting to print with the cover open.
- Media end detection has been improved so that the printer does not detect "media end" mistakenly due to a curling of the print media, etc. in spite of presence of remaining media.
- Firmware update has become executable even in error status only when the error is [Print head position can't be Initialized.] Refer to the latest User's Guide for how to update the firmware with this case.
- Various adjustment values have become respectively registerable by media type and size while they have been only by media type. You are no longer forced to readjust a value each time the print media in use is changed to a different size.
- Intensity steps in Half Cut Motion have been changed from 2 steps to 6 steps.
- Detecting condition for remaining amount of Ink Ribbon has modified as the amount rarely has been indicated improperly.
Ver.03.00
・The label tape transport control was optimized.
・To make it easier to see when your PC or Bluetooth connection is complete and you're ready to print, we've changed the display.
・We have optimized the amount of rewinding when "do" the whole cutting of the nameplate and "have" the rewinding motion.
・Fixed a conversion error when converting "character placement setting conditions" set in Mk2600 to MK5000.
・Detection accuracy has been improved by changing the ink ribbon detection control.
Operating System:
Windows 11
Windows 10 (64-bit)
Hardware:
Computer on which the above operating system runs
Follow the below procedure to upgrade the printer firmware:
1. Click [DOWNLOAD] to download the firmware upgrading program (.exe file).
2. Open the folder where the downloaded .exe file resides. (Check the browser settings to find the save location.)
3. Double click the downloaded .exe to start the firmware upgrading program.
4. Follow the on screen instructions to complete the installation.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Thailand) Co., Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
