Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF8300)

Last Updated : 03-Mar-2010
Issue Number : 8200770500

Solution

If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing "Adj. Fine Feed" during printing to fine-tune the feed amount.

NOTE

Always execute Adj. Quality before Adj. Fine Feed.

Once you execute Adj. Quality, the Adj. Fine Feed value will revert to 0.

　-> Automatic Banding Adjustment (Adj. Quality) (iPF8300)

　-> Manual Banding Adjustment (Adj. Quality) (iPF8300)

Perform adjustment as follows

1.On the "Tab Selection screen" of the Control Panel, press

or

to select the Settings/Adj. tab (

).

NOTE

If the "Tab Selection screen" is not displayed, press the "Menu" button.

2.Press the "OK" button.

The "Set./Adj. Menu" is displayed.

3.Press

or

to select "Adj. Fine Feed", and then press the "OK" button.

4.Press

or

to select a setting value in the range -5 to +5, and then press the "OK" button.

The setting is now applied.