19-Dec-2024
0200525910
I have read and understood the disclaimer below
and wish to download the designated software
Wi-Fi Connection Assistant is the software application that enables your computer to communicate with the printer. You can use this utility on your computer to do the basic settings such as entering the printer IP address or selecting the network frame type.
[Ver.1.9.1]
- macOS Sequoia 15 has been supported.
[Ver.1.9.0]
- The supported models have been added.
[Ver.1.8.1]
- macOS Sonoma 14 has been added as a supported OS.
[Ver.1.8.0]
- The supported models have been added.
[Ver.1.7.0]
- Wi-Fi encryption protocol supports WPA3.
- The supported models have been added.
[Ver.1.6.0]
- macOS Monterey (12) has been added as a supported OS.
- The software name has been changed.
IJ Network Device Setup Utility -> Wi-Fi Connection Assistant
- The supported models have been added.
[Ver.1.5.0]
- The supported models have been added.
- macOS Big Sur (11) has been added as a supported OS.
[Ver.1.4.1]
- The supported models have been added.
- macOS Catalina (10.15) has been added as a supported OS.
[Ver.1.4.0]
- The supported models have been added.
- Enable displaying printer status with the application when diagnosing or recovering is failed.
[Ver.1.3.0]
- The supported models have been added.
- macOS Mojave (10.14) has been added as a supported OS.
[Ver.1.2.0]
- The supported models have been added.
[Ver.1.1.0]
- macOS High Sierra (10.13) has been added as a supported OS.
- The supported models have been added.
macOS Sequoia 15
macOS Sonoma 14
macOS Ventura 13
macOS Monterey 12
macOS Big Sur 11
macOS Catalina 10.15
macOS Mojave 10.14
macOS High Sierra 10.13
macOS Sierra v10.12.1 or later
OS X El Capitan v10.11
OS X Yosemite v10.10.5
Download / Installation Procedures
1. Download the file. For the location where the file is saved, check the computer settings.
2. Double-click the downloaded file and mount it on the Disk Image.
3. Double-click the mounted Disk Image.
4. Double-click the packaged file in the folder. Installation starts automatically.
All software, programs (including but not limited to drivers), files, documents, manuals, instructions or any other materials (collectively, “Content”) are made available on this site on an "as is" basis.
Canon Marketing (Thailand) Co., Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).
You shall not distribute, assign, license, sell, rent, broadcast, transmit, publish or transfer the Content to any other party. You shall also not (and shall not let others) reproduce, modify, reformat, disassemble, decompile or otherwise reverse engineer or create derivative works from the Content, in whole or in part.
You agree not to send or bring the Content out of the country/region where you originally obtained it to other countries/regions without any required authorization of the applicable governments and/or in violation of any laws, restrictions and regulations.
By proceeding to downloading the Content, you agree to be bound by the above as well as all laws and regulations applicable to your download and use of the Content.
