Recording Movies at Specific Shutter Speeds, Aperture Values, and ISO Speeds (PowerShot SX60 HS)

Last Updated : 16-Sep-2014
Issue Number : 8202184900

Solution

Set your preferred shutter speed, aperture value, and ISO speed. Settings can be adjusted prior to recording or while you are recording a movie.

The setting procedures are explained below.

Adjusting settings prior to recording

1. Set the mode dial to <Movie> (

) and press the <Power> button to turn the camera on.

Press the <FUNC./SET> (

) button, press the <

><

> buttons to choose [ Movie Mode]* in the menu, and then Press the <

><

> buttons to choose [Manual] (

)

* If the settings have not been changed, [

] will be displayed as the default mode.

3. Press the <

> button to choose

shutter speed,

aperture value, or

ISO speed, and then turn the <

> dial to choose a value.

Shutter Speed	15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2, 1.6, 1.3, 1, 0.8, 0.6, 0.5, 0.4, 0.3, 1/4, 1/5, 1/6, 1/8, 1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60, 1/80, 1/100, 1/125, 1/160, 1/200, 1/250, 1/320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000
Aperture	f/3.5, f/4.0, f/4.3, f/4.5, f/5.0, f/5.6, f/6.3, f/6.5, f/7.1, f/8.0
ISO Speed	AUTO 100, 125, 160, 200 250, 320, 400, 500, 640, 800 1000, 1250, 1600, 2000, 2500, 3200

NOTE

With [AUTO] ISO, the exposure level mark moves when the shutter button is pressed halfway, showing the difference from the standard exposure level.

With ISO settings other than [ AUTO], an exposure level mark based on your specified shutter speed and aperture value is shown for comparison to the standard exposure level.

4. Press the <Movie Button> (

) to start shooting.

Changing Settings during Recording

Settings can also be adjusted while you are recording a movie, by following step 3 in the previous section. However, any changes in brightness are recorded in the movie.

NOTE

To make the sound of the <> dial quieter, press the <><> buttons and adjust the setting.
You can switch between adjusting the shutter speed, aperture value, ISO speed, and focal position during MF movie recording each time you press the <> button. Press the <><> buttons to configure these settings.