The Speedlite EL-1 (Ver. 2) is capable of micro flashes of power as low as 1/8192 to express colour nuances, along with a high-speed flash recycle time of 0.1 sec and a continuous flash burst of up to 160 times. Apart from being dust and drip-resistance, Speedlite EL-1(Ver.2) can fire up to 340 times at full power of 1/1 with the new LP-EL battery.
The Speedlite EL-1(Ver.2) is engineered to provide stable flash burst at a low flash output. The new structure design with its improved firing circuitry provides precise flash output, making it possible to achieve 1/8192 micro flash.
Each reduction of power on the Speedlite reduces the output of the flash by half, effectively providing 1 f-stop of dynamic range. The Speedlite EL-1(Ver.2) offers up to 14 f-stops of dynamic range, from full power of 1/1 down to 1/8192.
With the Speedlite EL-1(Ver.2), you're able to wirelessly control up to 15 other flash units via radio transmission. If the main transmitter and receivers are all Speedlite EL-1(Ver.2), you could even wirelessly control the flashes to fire micro flashes of 1/8192.
The second-curtain synchro feature can also be utilised when paired with compatible Speedlites.
Flash recycle time refers to the time it takes for the flash to recharge sufficient energy to fire again and capture the precise moment.
The Speedlite EL-1 (Ver. 2)'s charging circuit and the use of a lithium-ion battery enable faster charging times, achieving full recharge in just 0.9 seconds* for a 1/1 output and 0.1 seconds for a 1/8192 output.
*using CP-E4N allows full recharge at 0.4 seconds
Using the new LP-EL* lithium-ion battery, the Speedlite EL-1(Ver.2) is capable of up to 340 flashes on a full charge.
When paired with CP-E4N, you can achieve up to 640 flashes.
*can be charged with LP-E6N & LP-E6NH battery chargers as well.
With a new xenon bulb and an active cooling system that uses a built-in fan to circulate cool air inside the flash head, the number of continuous flash bursts is increased.
The Speedlite EL-1(Ver.2) is now capable of firing up to 160 times continuously on full power of 1/1.
The improved E-TTL (Evaluative Through-The-Lens) metering allows further customisation to better suit your needs. The Speedlite EL-1(Ver.2) allows you to choose your desired balance (Ambience-priority/ Standard/Strong) based on the available light (Dark/Middle/Light).
The memory-in-pixel reflective LCD display panel of the Speedlite EL-1(Ver.2) provides a clear view of your settings.
The addition of a joystick in the middle of the dial provides a more intuitive way to browse through the menu and to make adjustments.
The Speedlite EL-1 (Ver. 2) incorporates a set of twin LED modelling lamps with 5-step brightness and colour adjustment into its design.
You can better envision the direction of the light from the Speedlite before shooting, allowing for more accurate adjustments.
The rubber adapter is attached to the lock component of the Speedlite, which in turn attaches to the camera's hot shoe. When in locked position, it provides dust and drip-resistance.
Sealings are applied to moving parts and joints, as well as exterior parts, to provide Speedlite EL-1 (Ver. 2) with the dust and drip resistance equivalent to that of the EOS-1D X series.
Rubber materials are used on the battery compartment lid and terminal cover.
