Shooting subjects up close (PowerShot SX710 HS)
สารละลาย
If you are shooting a subject at close range, and if the subject cannot be easily focused within the normal shooting range, switching from the normal mode to the [Macro] (
) mode will make it easier to focus on the subject.
) mode will make it easier to focus on the subject.IMPORTANT
- In the following example procedure, the camera's shooting mode has been set to [Program AE] (
). - If the flash fires, vignetting may occur.
1. Press the <Power> button to turn the camera on.
2. Press the <Macro> () button.
) button.
3. Press the [ 
], [ 
] buttons or turn the [ 
] dial to choose [Macro] (), and then press the <FUNC./SET> [ 
] button.
], [ ] buttons or turn the [ ] dial to choose [Macro] (), and then press the <FUNC./SET> [ ] button.
Once the setting is complete, the [Macro] () icon is displayed on the LCD Monitor.
) icon is displayed on the LCD Monitor.
REFERENCE
- Try attaching the camera to a tripod and shooting in [Self-Timer] to prevent the camera from moving and blurring the image.
NOTE
- Zoom Lever operations when the camera is set to [Macro] () mode.
In the 
yellow bar display area below the zoom bar, 
[ 
] will turn gray and the camera will not focus.
yellow bar display area below the zoom bar, [ ] will turn gray and the camera will not focus.The shooting distance for each [Focusing Range] is as shown in the following table (from the end of the lens). If you shoot beyond the following ranges, the subject may be out of focus.
Also, the [Focusing Range] cannot be set in some shooting modes. Please see the following table for details.
| Model | Shooting distance | Shooting modes in which [Focusing Range] cannot be set | ||
|---|---|---|---|---|
[Normal] | [Macro] | [ Manual focus] | ||
| PowerShot SX710 HS | 5 cm (2.0 in.) – infinity (W)* 1.4 m (4.6 ft.) – infinity (T)** |
1 – 50 cm (0.4 in. – 1.6 ft.) (W) | 1 cm (0.4 in.) – infinity (W)* 1.4 m (4.6 ft.) – infinity (T)** |
 ,  ,  ,  ,  ,  ,  ,  |
) to the maximum wide angle side (Max. wide angle).** (T): When turning the loom lever toward (
) to the maximum telephoto side (Max. telephoto).