ไดร์เวอร์, ซอฟต์แวร์ และเฟิร์มแวร์

This updater will upgrade your printer's firmware to version 1.110. To perform this upgrade, a USB cable and a computer are needed.

This updater will upgrade your printer's firmware to version 1.110. To perform this upgrade, a USB cable and a computer are needed.

This is a printer driver for your selected model.

This updater will upgrade your printer's firmware to version 1.142. To perform this upgrade, a USB cable and a computer are needed.

This updater will upgrade your printer's firmware to version 1.142. To perform this upgrade, a USB cable and a computer are needed.

Firmware Version 1.0.5.1 incorporates the following enhancements:1. View Assist can now be applied and adjusted during playback.2. Optimizes Focus peaking to reduce interference from noise at high sensitivity settings.3. Adds the assignable buttons settings menu function:– Tele-converter [Tele-converter ...

Firmware Version 1.0.5.1 incorporates the following enhancements:1. View Assist can now be applied and adjusted during playback.2. Optimizes Focus peaking to reduce interference from noise at high sensitivity settings.3. Adds the assignable buttons settings menu function:– Tele-converter [Tele-converter ...

Firmware Version 1.0.8.1 incorporates the following enhancements:1. Adds [Zoom Ring End Response] option to improve performance at the end of the zoom ring movement.2. Adds [Auto IS Off Using Tripod] option to turn off temporarily when the camera is installed on a tripod.3. Enables to display to below ...

Firmware Version 1.0.8.1 incorporates the following enhancements:1. Adds [Zoom Ring End Response] option to improve performance at the end of the zoom ring movement.2. Adds [Auto IS Off Using Tripod] option to turn off temporarily when the camera is installed on a tripod.3. Enables to display to below ...

Firmware Version 1.0.2.1 incorporates the following enhancements:1. Fixes an issue that may impact the camera’s ability to operate when [High-speed continuous shooting +] is selected in PHOTO mode while certain lenses are attached.*1*1 RF400mm F2.8 L IS USM, RF600mm F4 L IS USM, RF800mm F5.6 L IS USM, ...

Firmware Version 1.0.2.1 incorporates the following enhancements:1. Fixes an issue that may impact the camera’s ability to operate when [High-speed continuous shooting +] is selected in PHOTO mode while certain lenses are attached.*1*1 RF400mm F2.8 L IS USM, RF600mm F4 L IS USM, RF800mm F5.6 L IS USM, ...

Firmware Version 1.1.3.1 incorporates the following enhancements:1. View Assist can now be applied and adjusted during playback.2. It is now possible to change the LUT applied during playback.3. Enables display of the information below on [DISP Level 2].-Recording Format-Main Resolution-Sensor Mode-Digital ...

Firmware Version 1.1.3.1 incorporates the following enhancements:1. View Assist can now be applied and adjusted during playback.2. It is now possible to change the LUT applied during playback.3. Enables display of the information below on [DISP Level 2].-Recording Format-Main Resolution-Sensor Mode-Digital ...

Firmware Version 1.0.5.1 incorporates the following enhancements:1. Adds [Full Frame 3:2] to the sensor mode.The following formats can be recorded to CFexpress card:-Main video recording-RAW-6000x4000-29.97P/23.98P/25.00P/24.00PThe following formats can be recorded to SD card:-Proxy Recording-XF-AVC ...

Firmware Version 1.0.5.1 incorporates the following enhancements:1. Adds [Full Frame 3:2] to the sensor mode.The following formats can be recorded to CFexpress card:-Main video recording-RAW-6000x4000-29.97P/23.98P/25.00P/24.00PThe following formats can be recorded to SD card:-Proxy Recording-XF-AVC ...

The Neural network Upscaling Tool is high-definition upscaling software.

The Neural network Upscaling Tool is high-definition upscaling software.

Driver, CaptureOnTouch and User Manual

This updater will upgrade your printer's firmware to version 2.020. To perform this upgrade, a USB cable and a computer are needed.

This updater will upgrade your printer's firmware to version 2.020. To perform this upgrade, a USB cable and a computer are needed.

This product is software for configuring the initial network connection settings for your computer and printer.

The MF Scan Utility and MF Toolbox necessary for adding scanners are also installed. To find out which application the printer model you are using supports, refer to the Readme file.

If using this driver, the [MF/LBP Network Setup Tool] can be used to configure the initial network connection settings. Download the [MF/LBP Network Setup Tool] from the Web site.